This online shop is using cookies to give you the best shopping expierience. Thereby for example the session information or language setting are stored on your computer. Without cookies the range of the online shops functionality is limited. View details.
SXT Buddy V2
Weight: 17 kg

 
SXT Buddy V2 - this name stands for an extremely comfortable driving experience, high-quality components and superior driving performance. Based on the predecessor, many details of this vehicle have been developed and improved. The differences to the predecessor at a glance are the following:
  • optimized engine power to now max. 650 watts
  • increased max. speed of 35 km/h
  • standard built in battery with high capacity of 10,4 Ah with LG brand cells
  • now with two mechanical brakes (low-wear drum brakes)
  • improved taillight
  • now with kickstand
  • two-piece rims and engine for easier tire change
  • optimized waterproofness of the battery compartment
  • Tire upgrade to CST tires
  • optimized valve position with rear 90 ° and front 30 ° angled valve
  • Optimized control unit and driving performance

The difference of the SXT Buddy V2 to many other compact electric scooters from our range, lies in the 8.5 inch tires which ensure very comfortable and smooth driving characteristics. The air-filled tires with tubes dampen many small bumps completely, which means that much less vibration is transmitted to the scooter and thus the driver.

The drum brakes front and rear are operated with Tektro brake levers, mounted on the handlebar left and right and are due to their structure extremely low maintenance and very durable. The operation and acceleration is done on the right handlebar grip with the control unit, including thumb throttle. The SXT Buddy V2 has 3 speed modes, with which the speed can be adjusted to 15, 25 and up to max 35 km/h via the + and - buttons on the control unit. In order not to have to press the thumb throttle grip on longer distances permanently, the electric scooter also has an integrated cruise control which can be activated or deactivated via the menu as desired.

The built-in engine in the vehicle is a brushless, maintenance-free hub motor with a capacity of 650W max. The electrical power is supplied by a 36V Lithium Ion battery with a capacity of 10.4 Ah which corresponds to 374 Wh and consists of 18650 brand cells from LG. The charging time of the battery with the supplied charger is approximately 6 hours when the battery is completely empty. The max. range at a payload of 75 kg at a temperature of 25 ° C and ride on a level track is up to 40 km.

To prevent accidental starting, the SXT Buddy V2 has a so-called kick-start mode which means that the scooter must be kicked the first few meters before the throttle starts working - this to relieve the engine when starting and as already mentioned prevent inadvertent approach.

The foldable vehicle frame is made of high-quality 6061 T6 aluminum which leads to a total vehicle weight of 13.7 kg - light enough to keep the electric scooter almost everywhere. The ultra-stable aluminum frame allows a max. payload of up to 120 kg. Illuminated is the scooter front and rear with LED lights that can be activated via the control unit.

IMPORTANT NOTE!!! The SXT Buddy V2 model is not allowed to be used under road traffic licensing regulations.
street-legal
no
Max. range (in km - at 22°C with 70 kg payload)
40
Max. speed (in km/h)
35
Speeds / gears
15 / 25 / 35 km/h
Max. motor power (in watts)
650
Type of drive
Brushless hub motor
Max. payload (in kg)
120
Length, width, height (in cm)
108 x 46 x 105
Length, width, height / folded (in cm)
95 x 36 x 25
Weight (battery incl.) in kg
13,7
Battery weight (in kg)
2,06
Operating voltage (in volts)
36
Battery capacity in Ah
10,4
Battery capacity in Wh
374,4
Battery type
Lithium
Battery removable for charging
no
Cell type
18650 LG
Max. Charging time (in hours)
6
Cruise control
yes
Operation
Thumb throttle
Brake system
Drum brake front & rear
Tires
CST 8.5 x 2.0
IP protection class
54
Vehicle frame
Ultrastrong 6061 T6 Aluminum
Handlebar height (in cm)
105
Wheelbase (in cm)
80
Ground clearance (in cm)
6
Scope of delivery
Escooter, manual, charger
Kick-Start function
yes
Lighting system
LED front & rear
Foldable
yes
writes
Amazing scooter fantastic presentation . Got mine and within 5 minutes I was on the scooter . Amazing scooter love well done to Sxt was much better than I expected . Highly recommended scooter

1.400,00 € 1.200,00 €* * Weight 64.6 kg
1.249,00 € 1.100,00 €* * Weight 23 kg
 
 
99,90 €* * Weight 0.79 kg
39,99 €* * Weight 0.92 kg

SXT Buddy V2 - FAQs

Place your foot on the step and simultaneously press the release lever on the folding mechanism. At the same time, grab the handlebars with both hands and push them forward away from you. The release lever comes loose and you can fold the scooter easily and with little effort. Never use force or tools - this is never necessary.
Brake pads wear out during use. All disc brakes always have an inner and an outer brake pad. The inner one (towards the wheel) is always fixed, while the outer one can move back and forth. After a certain time, the inner lining must therefore be readjusted and slightly adjusted towards the brake disc in order to ensure an even and safe braking process again. To do this, readjust the large adjusting screw on the inside of the brake calliper accordingly. It is also possible that the brake pads have reached their run-off / wear limit and need to be replaced with new ones. On vehicles with drum brakes, you can readjust them using the Bowden cable and the locking screw.
As a rule, the fault here is that a plug is loose somewhere or that it fails due to a loose connection. Something small that is preventing the scooter from flowing electricity in all the major parts. For example, it can also be due to a missing blade fuse / not activated main fuse. The scooter is activated, i.e. the front light lights up, the LEDs light up but the engine does not turn: 1. The side stand must be raised for the throttle to work. 2. The plug connections on the control unit must be checked here. Unplug individually and reconnect. Also check the wiring from the throttle grip - this is the cable from the throttle grip come follow and check.
The rims can be divided into two parts. Please remove the necessary screws and take one part to the left and the other to the right in order to be able to change the tire quickly and easily. When assembling the rim/s, please pay attention to fixing points, such as valve recesses.
Readjust the steering head bearing.
Sometimes it can happen that the 25kmh limit has been programmed at the factory. This can only happen with the SXT Buddy V2 model (without road approval). In this case, the scooter does not go faster than 25kmh in stage 3, although according to the description it should reach 35kmh. The solution: 1. switch on the scooter 2. press "Plus" & "Minus" at the same time and keep them pressed until the menu appears. 3. press "Plus" , "Minus" & "ON" at the same time and keep pressed until the submenu appears. 4. Go to menu item 2 with the ON button. The current maximum speed is displayed there. 5. Set the desired maximum speed with the + and - buttons. 6. 6. exit the menu by pressing and holding the "ON" button.
The shopping cart is empty.
* incl. tax, plus shipping